Instruction Manual
MAN-009
4
www.macmedical.com
General Specifications
1.
Material:
a. Sink basin and sink top: 14 gauge, 300 series stainless steel
b. Sink skirt: 18 gauge, 300 series stainless steel.
2.
Plumbing Material
a. 1/2” copper or brass pipe
3.
Utility requirements:
a. Cold water - 20 to 50 psig 70 deg F max
b. Hot water - 20 to 50 psig 120 deg F to 140 deg F
c.
Water lines should be flushed clean before water connections are made.
d.
It shall be the customers responsibility:
• to ensure by use of pressure regulators or other means, that maximum specified pressures are not
exceeded.
•
to ensure that water supplies are properly protected for internal cross connection control in
accordance with local building and plumbing requirements.
•
to eliminate water hammer conditions should they occur in the service piping.
4.
Power requirements (for sinks with infrared sensor operations)
a. 120 Volt, 60 Hz, single phase, 15 amp GFIC protected electrical outlet (by others), installed per local
building codes.
5.
Sink Weight
a. Single basin - 130 lbs
b. Double basin - 230 lbs
c. Triple basin - 320 lbs
6.
Sink Certifications
a.
UL and cUL certified
b. California OSHPD pre-approved when mounted on a structurally sound wall.
