Instruction Manual
MAN-009
11
www.macmedical.com
Installing and Operating the Soap Spout
To prevent damage during shipment, the soap dispenser is stored inside the
sink basin. Soap Dispenser tubing is also included. The dispenser spout should
be installed before hanging the sink.
1. To install - remove the bushing (Fig. 7 - Item 3 shown in green).
2. Feed the spout (item 1) through the small hole at the top of the sink (Fig.
8). The nut (item 2) should rest on top of the sink.
3. Re-install the bushing onto the spout from inside the cabinet (Fig. 9).
4. Attach the soap tubing to the spout and soap pump (circled in red) as
shown in Fig. 10 and Fig. 11.
To Operate the Soap Pump - press the soap spout down repeatedly to start
the flow of the soap.
Fig. 7: Soap Spout with nut and bushing
Fig. 8: Install Soap Spout
Fig. 9: Secure spout with bushing
Fig. 10: Install soap dispenser tubing
Fig. 11: Close-up of soap pump with tubing attached
