background image

EN

08

Getting

 started...

MLM3641-Li 

by MacAllister

product in the presence of an open flame. An exploded 

battery can propel debris and chemicals. If exposed, 

flush with water immediately.

8.  

Follow all charging instructions and do not charge 

the battery pack outside the temperature range 

specified in the instructions.

 

Charging improperly 

or at temperatures outside the specified range may 

damage the battery and increase the risk of fire.

9.  

Do not charge battery in a damp or wet location.

 

Following this rule will reduce the risk of electric shock.

10. 

Longer life and better performance can be 

obtained if the battery is charged when the air 

temperature is between 18°C and 24°C.

 

Do not 

charge the battery in air temperature below 5°C or 

above 40°C. This is important as it can prevent serious 

damage to the battery.

11. 

Remove the battery pack from the product when 

not in use.

12.

 Don’t maintain the battery pack on the charger 

when not in use.

13.

 After extended periods of storage, it may be 

necessary to charge and discharge the battery pack 

several times to obtain the maximum performance.

14.

 Do not disassemble the battery and avoid 

mechanical damage to the battery. Risk of short 

circuit and fumes may be emitted.

 

Ensure fresh air 

and seek medical assistance in the event of discomfort.

15. 

Never service damaged battery packs.

 

Service 

of battery packs should only be performed by the 

manufacturer or authorized service providers.

16. 

When disposing of battery pack, keep the battery 

pack of different electrochemical systems separate 

from each other.

Safety warnings

Safety information

Содержание Solo MLM3641-Li









































Отзывы: