Mac allister Solo MLM3641-Li, Руководство пользователя

Страница: 20 / 40

EN
20
Getting
started...
MLM3641-Li by MacAllister
Battery pack
Connect battery pack
1. Make sure the start lever (3) is released and safety switch button (1) is not
pressed.
2. Attach the battery pack (22) to the product. Ensure it snaps in place.
3. Insert the safety key (16) into the slot fully.
4. Your product is now ready to be used.
Charging the battery pack
The battery pack (22) for this product has been shipped in a low charge condition.
Charge it fully before first use.
Refer to the charger instruction manual (MFC36) for the details.
Battery capacity indicators
The battery pack (22) is equipped with the battery capacity indicators (22a)
which are used to give an indication of the battery pack’s remaining capacity.
Press the battery capacity button (22b) to check battery capacity (Fig. 11).
The LEDs will stay lit for approximately 5 seconds.
Before you start
1. Hold the groove (15a) and open the
battery cover (15) (Fig. 10, step 1).
2. Press down the release button (22c)
to unlock the latch of battery pack (22)
(Fig. 10, step 2).
3. Slide out the battery pack (22) from
the battery compartment (Fig. 10,
step 3).
4. Close the battery cover (15).
22c
22 15
15a
1.
2.
3.
Fig. 10
22a 22b 22
76-100%
51-75%
26-50%
5-25%
<5%
Fig. 11 Fig. 11
Fig. 10