background image

29

MCSW40-2

In

 more 

detail

 . . .

This product must not be used for cutting other materials, such as plastic, stone, metal, 

wood that contains foreign objects, or materials that are harmful to health. This product 

should not be used outside of domestic premises e.g. for cutting firewood in forested areas.

The product may only be used with the guide bar/saw chain combination stated within 

these instructions. The use of other types or sizes is not allowed, because it can result 

in serious personal injury or death.

For safety reasons it is essential to read the entire instruction manual before first operation 

and to observe all the instructions therein. This product is intended for private domestic 

use only, not for any commercial trade use. It must not be used for any purposes other 

than those described.

* A trained operator is a person who has the competence and knowledge in the use 

and hazards associated with using a chain saw as well as the precautions to be taken 

to limit these hazards.

Safety equipment

The product has several pieces of safety equipment which reduce the risk of injury when 

working (Fig. 16):

16

Throttle trigger 

lock-out

Chain brake /  

front hand guard

Chain catcher

Quick start / Product functions

Содержание MCSW40-2
































































Отзывы: