FR
IE
Getting
started...
13
Getting started...
Assembling the rip fence (Fig. 7-8)
Assembling the mitre gauge (Fig. 9)
MTSP800A by
MAC ALLISTER
Before you start
> This fence is used for all ripping operations. Never rip freehand without the fence
in place and securely locked.
> Adjust the rip fence (
13
) to the desired width from the blade using the scale
rules on the table surface for reference. To adjust loosen the two securing
knobs (12) (one at each end).
Note: The rounded washer (24) should be placed outside and squared washer (25)
should be placed inside.
>
Slide the mitre gauge (14) rail into the rip fence.
Fig. 7
Fig. 9
Fig. 8
13
12
14
24
25
