4
5
7
8
6
4 0
The molds have a water level control. If you overfill them
the water will spill out.
With the knobs facing you, turn the cassette clockwise,
the molds will then be in a horizontal position.
Finally, put the cassette back into the Ice Factory. Move it
on its rails as far as it will go. And wait for the ice tobe
made. Be sure to dry excess water from the bottom of the
cassette before putting it in your freezer.
Unmolding
Turn or twist each knob in the clockwise direction until
the ice cubes fall into the drawer below. The drawer can
only store the ice from the three molds.
Make sure the ice drawer is empty before unmolding the
next batch of ice.
Clean the surface under the drawer at least once a week.
caring for your refrigerator
We recommend storing food in containers with lids,
wrapped in or stored in airtight materials such as aluminum
foil, plastic containers or plastic wrap.
Do not store hot foods in the fresh food compartment or
freezer. You should wait until they have cooled down to
room temperature.
Only open the doors for the necessary time to store or
remove food items or drinks. By doing this you will reduce
energy consumption and improve the performance of
your refrigerator.
It may be difficult to open the door again after having
opened and closed it to introduce or remove foods. This
is normal due to the vacuum that forms in the interior of
the refrigerator caused by the exchange of air at different
temperatures. If this happens, wait 10 to 15 seconds before
trying again and the doors should open easily.
Always store onions in a plastic bag or a hermetically-
sealed container to prevent their odor from penetrating
other foods.
Do not store garlic inside your refrigerator as a cold, dark
environment promotes its germination.
4
6
7
8
5
