
8
UNIT PARTS IDENTIFICATION
NOTE
:All the illustrations in the manual are for explanation purpose only.Your air
conditionar may be slightly different. The actual shape shall prevail.
NOTE: Optional parts( ), depending on model you purchased.
1. Front panel
2. Air filter
3. Frame
4. Cabinet
5. Air inlet grille (outdoor side)
6. Air outlet grille
7. Operation knob
8. Power supply cord
Model A
Model B
Model C
NOTE: The front panel and cabinet may be slightly different according to the models,
but the functions are the same. The following illustration is for explanation purpose
only, the actual shape of the machine you purchased may be slightly different.
Model D
Vent Control
The vent control is located above the control knobs. The operation method is different on
different models (see the following figures).
For maximum cooling efficiency, CLOSE the vent. It will allow internal air circulation.
OPEN the vent to discharge stale air.
CLOSE VENT OPEN
To open the vent, pull the lever toward you
To close it, push it in.
To open the vent, set the lever to the right position
To close it, set the lever to the left position.
CLOSE OPEN
Accessories
( )
?
Seal
(Used on
drain joint)
1 pc
Screw
2 pcs
2 pcs or 4 pcs
(For >18000Btu/h models only:
Used to fasten the front panel)
(Used to install the drain
tray)
Drain Joint
Drain Tray
Rubber Plug
1 pc or 2 pcs
(depend on model you purchased)
( )
?
( )
?
or
8 pcs
Wooden screw
(optional)( )
?
1 pc
1 pc
1 pc