
4
safety precautions
To prevent injury to the user or other people and property damage,
the following instructions must be followed. Incorrect operation due
to ignoring of instructions may cause harm or damage. The serious-
ness is classified by the following indications.
WARNINGS
• Plug in power plug properly. Otherwise, it may cause electric
shock or fire due to excess heat generation.
• Do not operate or stop the unit by inserting or pulling out the
power plug. It may cause electric shock or fire due to heat gen-
eration.
• Do not damage or use an unspecified power cord. It may cause
electric shock or fire. If the power cord is damaged, it must be
replaced by the manufacturer or an authorized service centre
or a similarly qualified person in order to avoid a hazard.
• Do not modify power cord length or share the outlet with
other appliances. It may cause electric shock or fire due to heat
generation.
• Do not operate with wet hands or in damp environment. It
may cause electric shock.
• Do not direct airflow at room occupants only. This could dam-
age your health.
• Always ensure effective earthing. Incorrect earthing may cause
electric shock.
• Do not allow water to run into electric parts. It may cause fail-
ure of machine or electric shock.
• Always install circuit breaker and a dedicated power circuit. In-
correct installation may cause fire and electric shock.
• Unplug the unit or disconnect the power supply to the unit, if
strange sounds, smell, or smoke comes from it. It may cause
fire and electric shock.
• Do not use the socket if it is loose or damaged. It may cause
fire and electric shock.
• Do not open the unit during operation. It may cause electric
shock.
• Leave the door closed while the air conditioner is running. It is
not designed to cool the entire house.
• Do not use the power cord close to heating appliances. It may
cause fire and electric shock.
• Do not use the power cord near flammable gas or combus-
tibles, such as gasoline, benzene, thinner, etc. It may cause an
explosion or fire.