193
t +31 88 500 2800
www.maaslandgroep.nl
CS500
050220
FLEXESS AQUA CODETABLEAU EN PASLEZER / FLEXESS AQUA KEYPAD AND CARDREADER
DIGICODE ET LECTEUR DE BADGES FLEXESS AQUA / FLEXESS AQUA CODE TASTATUR UND LESER
PROGRAMMING
PROGRAMMING RELAIS 1
PROGRAMMING A USER CODE
Programming a user code is only possible by means of addresses.
*
mastercode
#
11 1-600
#
code (4 till 6 cijfers)
#
*
*
(to leave programming)
1 - 600 are the addresses at which a user code can be programmed.
Note which code you program at which address, so a code can be changed separately later.
Example of programming a user code at address 1.
*
mastercode
#
11 1
#
1345
#
*
*
If the code is programmed correctly, the keypad can be operated by entering the code and ending with a #.
Code 1234 and the code starting with 0 are not allowed.
If an address is occupied, a new code cannot be programmed at that address and the keypad will beep 3 times.
PROGRAMMING USER CARDS
*
mastercode
#
11 offer card
#
*
1 - 600 are the addresses at which a user card can be programmed.
Make a note of which card you are programming at which address, so a card can later be removed individually.
Example of programming a card at address 1.
*
mastercode
#
11 1-600
#
offer card
#
*
If an address is occupied, a new card cannot be programmed at that address and the keypad will beep 3 times.
REMOVE CODES OR CARDS
*
mastercode
#
12 1-600
#
*
1 - 600 are the addresses to which a user code or user card is programmed.
Example to delete a user code or user card at address 1.
*
mastercode
#
12 1
#
*
AUTHORISATION SETTINGS
The door can be opened in 3 different ways:
- open with card only
- open with card and code
- open with card or code (factory default)
*
mastercode
#
13 0
#
*
Open with card only
*
mastercode
#
13 1
#
*
Open with card and code
*
mastercode
#
13 2
#
*
Open with card or code (factory default)
RELAIS FUNCTION AND PULSE TIME
The relay can be set to pulse or toggle function.
With pulse function, the relay is activated according to the default time of 5 seconds.
With the toggle function, the relay switches every time a valid card or code is entered.
Pulse function (factory default)
*
mastercode
#
15 0
#
*
The length of the pulse can be set from 1 to 99 sec.
*
mastercode
#
14 1-99
#
*
Toggle function
*
mastercode
#
15 1
#
*
