10
Hakki Pilke 38 Easy
Original
Version 6
3.1.2.
Placing the output conveyor in the operating or transport position
Place the output conveyor in the operating position as follows:
1.
Ensure that there is
sufficient
room
for
lowering
the
output
conveyor.
2.
Turn off the machine.
3.
Keep lock A open and
lower
the
output
conveyor down with a
winch to its lowest
position.
Note! Leave a sufficient
clearance (approx. 30
cm) for the discharge
opening
of
the
conveyor.
4.
Turn the upper section
of the conveyor to the
operating position with
handle C at the upper
end.
5.
Turn
the
output
conveyor's support bar B
to the side.
6.
Straighten the splitting
groove guard E into the
operating position.
7.
Lift the conveyor to the
desired angle with the
winch, and use lock D on
the
bottom
of the
conveyor to lock the
upper section of the
output conveyor in the
operating position.
Figure 5.
Figure 6. Figure 7.
Figure 8. Figure 9.
