19
www.massportal.com
Diameter
: the width of filament diameter. May differ a bit in reality for lower quality filaments. Set 1.75
mm for Mass Portal printers;
Extrusion multiplier
: normally set to 1, but can be adjusted if the extrusion flow is not as needed;
Extruder
: change the extruder’s temperature for first and all other layers. Depending on printing speed
and material sett 180-230°C for PLA and 220-240°C for ABS. The faster you print the more heating will
be needed. Remember that the maximum temperature for the extruder is 250°C, do not use it at or above
maximum temperature for prolonged periods;
Bed
: temperature of heating bed (printing surface) for the first and rest of the layers. Use 60-70°C for
PLA and 100-110°C for ABS. Remember that maximum for the heated bed is 120°C.
Keep fan always on
: may be useful for printing with PLA, but not recommended for ABS as it will always
cool the object when printing;
Enable auto cooling
: uses the cooling fan(s) automatically under 3D printing – recommended to use this
option. When printing with ABS set
Fan speed
and
Bridges fan speed
to zero.
