18
www.massportal.com
Pattern angle
: adjust the support material pattern angle;
Interface layers
: add extra layers where supports will be attached;
Interface pattern spacing
: lower value gives denser interface filling.
Complete individual objects:
use when printing multiple objects simultaneously. Check to complete
each object’s layer before going to work on another’s.
Default extrusion width
: the width of one extruded and printed layer’s line. It may differ a bit from layer
to layer. Also depends on the width of extruder (0.4 mm). Set to 0 for automatic calculation.
Bridge flow ratio
: change only when experimenting/needed to less or more than 1. Increases or
decreases the flow of filament when building bridges.
Threads
: set this accordingly to your computer’s CPU threads to get better performance but larger
memory consumption for object slicing.
Resolution
: set the value above 0 mm to get faster printing but less details/texture.
