────────────────────────────────────────────────
User Manual – PD100
11
Chapter 3. Maintaining PD-100
Cleaning the bill path of PD-100
1. Open the bill path by pulling up the upper module.
2. Gently wipe it or dust the bill path with the brush supplied or a dry, soft
lint-free cloth.
3. If stains remain, moisten a soft, lint-free cloth with water or a 50-50
mixture of isopropyl alcohol and water that does not contain impurities.
4. Wring out as much of the liquid as you can.
5. Wipe the bill path and the sensor surface again; do not let any liquid drip
into the unit.
NOTE: Avoid spraying cleaner directly on the equipment, and be sure to
dry the bill path before closing it.
