MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . Fax: + 49 9 31 4 97 94 29 . www.malighting.de
88888
1. Single Channels
1.1 Presets and Masters
There are two sets of faders (Preset 1 and 2) and one set of flash buttons
to control the single channels.
The Main Master controls the output and should be at 100% during stand-
ard operations.
Adjustments on the Presets can be faded in and out independently using
the two Preset Master faders.
The LED´ at the single channel buttons show the actual intensity of the
channel, but will change during Preview, Programming and Blackout
operations.
The Blackout button (DBO) underneath the Main Master fader will clear
the complete output, while the LED´s will still inform about the intensity
which comes up as soon as the button is released (exceptions: see 1.3
AUX Channels and 7.2.1 Switch Memories)
1.2 Add - Swop Buttons
The buttons will switch on the channel. The brightness of this effect can
only be reduced by the Main Master.
If the SWOP function is switched on (LED in the SWOP button lits up),
each press of a button will erase all other channels but the selected one
(Solo effect).
For further informations see:
Doubling the number of channels
- 7.1.1 WIDE Function
Changing the channel order
- 7.1.2 Softpatch
Locking single channels against SWOP effect
- 7.1.4 Swop Disable
Preset 2
faders
Preset 1
faders
Single
channel
buttons
SWOP-
button
Main-
Master
Preset-
Master 1
and 2
