MA LIGHTCOMMANDER II 48/6, Руководство пользователя

Страница: 17 / 48

Lightcommander 24/6 - 48/6 Lightcommander 24/6 - 48/6 Lightcommander 24/6 - 48/6 Lightcommander 24/6 - 48/6 Lightcommander 24/6 - 48/6
eMail: info@malighting.de . Tel.: +49 9 31 49 79 40 . User's Manual Lightcommander 24/6 - 48/6
17 17
17 17
17
3.6 Controlling the Fade between Chase Steps
The change between steps of a chase can be preformed as switching to
the new values or as a slow fade. The fade functions gets activated by the
FADE button in the chaser section.
On the Lightcommander II any fade will work as a dipless crossfade. A
single channel i.e., which is at 100% in the first and at 80% in the second
step, will not fade down and come up again, but will fade linearly from 100
to 80%.
The speed of the crossfade is set in the Speed Menu.
"Speed" button at the chaser section
switches to the menu "CHASER SPEED"
4. Display button SWAP
Changes the function of the display buttons to
control the FADETIME and the running direction.
As long as the FADETIME button is pushed,
the Encoder can be used to set the time.
SWAP
CHASER SPEED No. 01
SWAP
Sec
Hz
2.12
0.47
FADE 50%
RUN: 0.23 Sec
SOUND/MANUAL: 0.00 Sec
As long as button is
pushed, the Encoder
can be used to set the
fadetime.
LEARN FREE RUN
FADETIME SINGLE
Changes the
function of the
display buttons Chaser will stop
with the last step Inverts the
running
direction
When using FREE RUN mode, the Fadetime gets adjusted in percent of
the step time. Changing the speed of the chase will automatically adapt
the fadetime.
In case FREE RUN is switched off and the steps are recalled by sound
signal or the Step button, the fadetime is set in seconds.
FADETIME
Real fadetime in
seconds Fadetime for STEP
button mode or
SOUND control Fadetime in percent of the
step time (for FREE RUN
mode only)
1.
2.
3.
-
4.
SOUND
REVERSE