MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . Fax: + 49 9 31 4 97 94 29 . www.malighting.de
24
24
24
24
24
5.2 Recalling Sequences
2 x "X-Fade Menu" button.
1.
Selection of SEQUENCE (preprogrammed times get ignored) or TIMED
SEQUENCE (program will recall the preprogrammed fade times)
2a.
DIRECT
MEMORY
X - FADE SETUP
SELECT
MEMORY
CHASE
SEQUENCE
TIMED SEQUENCE
SELECT
REC.FADE
TYP: ON / OFF
01
06 STEPS
Selecting a sequence program number via encoder.
2b.
"X-Fade On/Off" button start the X-fade mode.
3.
X - FADE TIMED SEQUENCE No. 01
INFADE
OUTFADE
MANUAL
0 2
1.00
2.25
NEXT:
0 1
NEXT
02
CHASE 01 LINKED
STEP:
03 (06)
Go
4a.
The sequence can be recalled manually via the fader or
automatically via the GO button. If TIMED SEQUENCE was
selected, the preprogrammed fade times get recalled for
each step, but can still be modified.
A chase, linked to a sequence step, will be listed in the display before it
starts. As soon as the sequence step starts, the board cancels the chase,
which is actually running at the chaser section and will load and start the
linked chase. The brightness of the chase is fading in and out together
with the brightness of the sequence step. As long as the sequence controls
the chase, the LED in the chaser ON button blinks. To cancel or control the
chase independently from the sequence step, it has to be restarted with
the ON button. This way the brightness of the chase returns to be control-
led via the chase fader.
For further informations see:
Inserting a memory into the sequence step order
- 6.7.3 Modifying the step order
Returning to the previous step
- 6.7.3
Testing and modifying a running sequence
- 6.7.1 and 6.7.2
PREPARE
MEMORY
