Hotline: +49 5251 688865-99
. User's Manual
Network D
immer Processor
15
dim
LOGIN menu
After switching on the unit, the NDP will boot automatically and be logged in as „Unknown User“.
This user will not be authorized to change the settings (except date and time)
Login:
●
use the PREV or NEXT keys and the Encoder (or the arrow keys of the external keyboard) to navigate to the
LOGIN ADMIN or LOGIN USER cell
●
Press the Encoder or TAB key (the cell to be changed will be marked by an underscore and will blink)
●
Turn the Encoder, until the desired digit appears, or enter it using the keyboard
●
Jump to the next cell by pressing on the Encoder or the arrow key
●
Use the OK or ENTER key to confirm and finish your entry
Operating mode as admin (monitor color green - LEDs of the NEXT keys have a permanent green light)
In delivery state, enter 1234 as password, login with this password and change it if needed.
Operating mode as user (monitor color orange - LEDs of the PREV keys have a permanent red light)
In delivery state, enter 1234 as password, login with this password and change it if needed.
Change the passwords for admin and user (only possible if logged in as admin):
●
use the PREV or NEXT keys and the Encoder (or the arrow keys of the external keyboard) to navigate to the
LOG CHANGE PWD ADMIN or LOG CHANGE PWD USER cell
●
Press the Encoder or TAB key (the cell to be changed will be marked by an underscore and will blink)
●
Turn the Encoder, until the desired digit appears, or enter it using the keyboard
●
Jump to the next cell by pressing on the Encoder or the arrow key
●
Use the OK or ENTER key to confirm and finish your entry
LOGOUT:
By logging out, the user status will be reset to „Unknown User“.
AUTO LOGOUT:
Here, you can set the timeframe after which the logged-in user will be logged out automatically, if no entries are
made. This is to avoid unauthorized access to the NDP in case of longer absence.
or
Navigate with encoder
or arrow keys of an
extern keyboard
