M86 Security MSA, Руководство по установке

Страница: 23 / 118

P
RELIMINARY
S
ETUP
P
ROCEDURES
G
ENERAL
S
AFETY
I
NFORMATION
M86 S
ECURITY
I
NSTALLATION
G
UIDE
17
AC Power Cord and Cable Precautions
WARNING :
• The AC power cord for the server must be plugged into a grounded, power
outlet.
• Do not modify or use a supplied AC power cord if it is not the exact type required
in the region where the server will be installed and used. Replace the cord with
the correct type.
• Route the AC power cord and cables away from moving parts and foot traffic.
• Do not allow anything to rest on the AC power cord and cables.
• Never use the server if the AC power cord has been damaged.
• Always unplug the AC power cord before removing the unit for servicing.
Electrical Safety Precautions
WARNING:
Heed the following safety precautions to protect yourself from harm and the server
from damage:
CAUTION : Dangerous voltages associated with the 100-240 V AC power supply are
present inside the unit. To avoid injury or electrical shock, do not touch exposed connec-
tions or components while the power is on.
• To prevent damage to the server, read the information in this document for
selection of the proper input voltage.
• Do not wear rings or wristwatches when troubleshooting electrical circuits.
• To avoid fire hazard, use only the specified fuse(s) with the correct type
number, voltage, and current ratings. Only qualified service personnel should
replace fuses.
• Qualified service personnel should be properly grounded when servicing the
unit.
• Qualified service personnel should perform a safety check after any service is
performed.