3. FAQ and Troubleshoot
– Ethernet
16
Ethernet
Q1. Cannot use Ethernet
A1-1. Check if the LAN cable is properly connected to the
cradle and LAN output port AND AC power supply is
connected.
A1-2. Check if the E/U toggle switch is switched to
E
(left).
A1-3. If switch is changed to
E
while PDA is in the cradle,
remove the PDA from the slot then slide in again.
A1-4. Check if the Ethernet uses Static IP or DHCP. Then,
check if the PDA’s network adapter is configured accordingly.
Refer to next images for static IP configurations.
A1-5. If all above methods does not solve your issue,
contact your supplier.
Static IP Configuration
Windows Mobile
Windows CE
