3. FAQ and Troubleshoot
– Charging
13
This chapter provides frequently asked questions and its corresponding answers.
Charging
Q1. How to charge PDA using the cradle?
Step 1. Plug in the AC adapter plug to wall jack and 24
PIN connector to power connector of cradle.
Step 2. Insert the PDA to device slot to start charging the
PDA.
Note that directly connecting 24 PIN connector to PDA can
also charge the PDA.
Caution
1. Use the correct AC adapter with 5.2V, 3A output provided by M3 Mobile.
2. Incongruent change of battery can cause the explosion.
3. When attached battery is completely discharged, plug charger to main body, then reset the device to check if the
screen is back on. Leave at least for 10 min in charging state before use.
Q2. Charging Status
Charging status of the PDA and the extra battery is
indicated by LEDs.
LED charging indicator on the cradle ( No. 2 in description)
indicates the charging status of the extra battery.
LED on upper left corner (for RED and GREEN) or upper
right corner (for SKY) indicates the charging status of the
battery attached to the PDA.
