YOUNG M
K
III
DIGITAL-TO-ANALOG CONVERTER AND PREAMPLIFIER
REVISION P
R
A – AUGUST 2017
Copyright © 2017, M2Tech Srl
7
M2Tech
www.m2tech.biz
1. Unpacking and Placing the Unit
Lay the package on a table and open the external box by removing or cutting the adhesive
tape seal. Then extract the internal box and open it by lifting the front wing. The following
items are included:
one
YOUNG MKIII
;
one wall wart (AC-to-DC adapter);
one USB A-B cable;
two XLR-RCA high quality adaptors;
one remote control;
two AAA type batteries.
Should one or more item be missing, please contact your retail dealer.
Remove the
YOUNG MKIII
from the box and place it onto a stable base, far from heat
sources. Avoid full sunlight on the unit. Allow for ample room around the unit for venting.
The
YOUNG MKIII
is a high efficiency device; therefore it doesn’t produce relevant heat
during its operation. Regardless, it’s recommended to guarantee an adequate air flow
around the unit. Moreover, every time it will mainly be operated by remote control, it’s
recommended to place it so as the remote control’s infrared signals can easily reach its
front panel.
Avoid smoke, moisture, dirt and liquids from reaching the unit. Please note that any signs
of abuse will void warranty coverage.
Do not place the unit on thick carpets or inside a box or piece of furniture, not even close
to curtains.
