YOUNG M
K
III
DIGITAL-TO-ANALOG CONVERTER AND PREAMPLIFIER
REVISION P
R
A – AUGUST 2017
Copyright © 2017, M2Tech Srl
55
M2Tech
www.m2tech.biz
Figure 43
The configuration procedure is almost over: we still need to tell JRiver not to downsample
data streams with sampling frequency higher than 192kHz, (An operation which is usually
enabled to cope with all those DAC’s, still the vast majority, which can only accept
sampling frequencies up to 192kHz). Obviously, this would lead to trouble with DSD128,
which is same as a 352.8kHz PCM stream. Therefore, access the “DSP and output” menu
and set the parameter related to the processing of files with sampling frequency higher
than 192kHz as in Fig. 44.
Figura 44
JRiver configuration is complete and the user can now listen to PCM files up to 384kHz
and DSD files up to DSD256.
