M2TECH JOPLIN MKII, Руководство пользователя

Страница: 44 / 72

JOPLIN M
K
II
384
k
H
z
/32bit ANALOG-TO-DIGITAL CONVERTER
REVISION P
R
A – FEBRUARY 2015
Copyright © 2015, M2Tech Srl
44
M2Tech
www.m2tech.biz
on the encoder knob without rotating it will allow to access other parameter, in the
order listed above.
When the desired parameter is displayed, its value can be changed by simply
rotating the encoder knob. To confirm the new value for the current parameter, press
the encoder knob one last time.
To exit the menu without changing the displayed parameter value after the knob has
been rotated, press the Standby/Exit button once (Figure 1, 1). Anyway, the system
resets to the idle state after some seconds from the last operation on the knob.
8.2. Navigating the menu by the IR remote
The menu is accessed by pressing the Menu/Exit button on the remote once (Figure
3, 2). The first parameter (Input gain) is displayed along with its current value.
To display other parameters, use the arrow up and arrow down buttons (Figure 3, 3).
When the desired parameter is displayed, its value can be changed using the arrow
left and arrow right buttons (Figure 3, 3). To confirm the new value for the current
parameter, press the OK button (Figure 3, 4).
To exit the menu without changing the displayed parameter value, press the
Menu/Exit button once again (Figure 3, 2). Anyway, the system resets to the idle
state after some seconds from the last operation on the knob.