M2TECH JOPLIN MKII, Руководство пользователя

Страница: 11 / 72

JOPLIN M
K
II
384
k
H
z
/32bit ANALOG-TO-DIGITAL CONVERTER
REVISION P
R
A – FEBRUARY 2015
Copyright © 2015, M2Tech Srl
11
M2Tech
www.m2tech.biz
1. Unpacking and placing the unit
Lay the box on a table and open it by separating it from the external paperwork and
removing or cutting the adhesive tape seal. The following items are included:
•
one
JOPLIN MKII
ADC;
•
one wall adapter;
•
one A-B USB cable;
•
a remote control;
•
this manual.
Should one or more item be missing, please contact your retail dealer.
Remove the
JOPLIN MKII
from the foam enclosure and place it onto a stable base, far
from heat sources. Avoid full sunlight on the unit. Allow for ample room around the
unit for venting.
The
JOPLIN MKII
is a high efficiency device; therefore it doesn’t produce relevant heat
during its operation. Regardless, it’s recommended to guarantee an adequate air flow
around the unit. Moreover, every time it will mainly be operated by remote control, it’s
recommended to place it so as the remote control’s infrared signals can easily reach
its front panel.
Avoid smoke, moisture, dirt and liquids from reaching the unit. Please note that any
signs of abuse will void warranty coverage.