M2TECH JOPLIN MKII, Руководство пользователя

Страница: 19 / 72

JOPLIN M
K
II
384
k
H
z
/32bit ANALOG-TO-DIGITAL CONVERTER
REVISION P
R
A – FEBRUARY 2015
Copyright © 2015, M2Tech Srl
19
M2Tech
www.m2tech.biz
5. Connecting and powering the unit
ADVICE: all connections to other equipment in the system must be done when
all equipment are off. Failing to comply to this advice may expose the
JOPLIN
JOPLIN JOPLIN
JOPLIN
MKII MKII MKII MKII
to the risk of damages.
ADVICE: Windows users must install the driver prior to connecting the
JOPLIN JOPLIN JOPLIN JOPLIN
MKII
MKII MKII
MKII
to the PC (please refer to section 6).
Please refer to section 3, “Back Panel Description”.
Connect the “B” plug of a 2.0 USB A-B cable to the USB connector (Figure 2, 10) of
the
JOPLIN MKII
.
Connect the “A” plug of the cable to a 2.0 USB port of your computer.
Connect two interconnects to the analog inputs of the
JOPLIN MKII
(Figure 2, 4/5) and
to the outputs of your analog source (be it a turntable, a tuner, a tape recorder or
even the tape rec output of your amplifier).
Connect a digital cable with suitable termination (RCA, XLR or optical Toslink™) from
the
JOPLIN MKII
to your amplifier’s digital inputs or to a DAC (Figure 2, 6/7/9).
If you need to route the output of a digital source to your computer or to the amplifier,
you may connect the source to the
JOPLIN MKII
using an RCA digital interconnect
(Figure 2, 8).