email | [email protected]
tel | 866-931-8021
4.
INSTALLATION GUIDE
SATST4950
FEATURES
• Network: LTE Cat. M1/NBIOT
• Extremely Low Power Consumption
• Waterproof compliant: IP67
• 40mA Solar Panel
• Low Battery Alert
• Built-in 3-axis accelerometer
• Firmware upgradeable remotely (OTA)
• External power detection and reporting
PRIOR TO INSTALLATION
IMPORTANT:
There are two ways the SATST4950 device can be used,
and specific instructions listed below on how to turn the Asset
tracker on at the time of the installation.
1) Portable Asset tracker have the capability of using the sun to recharge
the device’s internal battery or the optional Accessory wall charger.
-
This installation method will require you to use the PAWN key
provided to turn the device ON at the time of installation* refer to
installation preparation details listed below in Step 1
2) Hardwired permanent mounted option, using the hardwired power
cable to connect to the Asset’s battery to allow recharging of the internal
battery. -
This installation method does not require the Pawn key to
turn the device on if you have connected the hardwired cable to
power the device will automatically turn once power is detected to
the SATST4950
Prior to installation, please note the ESN electronic serial number of the
device you are installing it is located on the device. Visit: m2minmotion.
com/getstarted/ to activate the device, Select Activate Asset Tracker-
PART Number SATST4950, enter your device’s information and select
your software plan, A member of M2M in Motion will be in touch to
complete your setup.
REQUIRED INSTALLATION TOOLS
Magnetic installation
• No tools required
Secured hardwired installation
• Screwdriver set
• Drill and drill bits
• Mounting Screws
• Screwdriver set
• Drill and drill bits
• Wire cutter/stripper
• Terminal crimper
• Digital multimeter
• Electrical tape
• Soldering iron
• Mounting screws
Содержание SATST4950
Страница 1: ...SATST4950 HARDWARE INSTALLATION MANUAL...
Страница 7: ...m2minmotion com LEARN MORE...
