Then the DHCP client will be activated for ethernet interface.
When you modified the settings, save them by the
Save & Apply
button.
1.10 DHCP, DNS settings
The DHCP service allows the automatic IP address providing for the connecting devices in the
current IP segment by the router.
The DHCP settings can be found at the Network menu, DHCP and DNS item.
If you attempted to enable the DHCP service, uncheck the
Disable DHCP for this interface
option. Then the related parameter settings will be visible with their default settings.
The Start field means the starting IP addres in the subnet for the connecting devces (by default
192.168.x…). You can Limit how many IP addresses will be provided. The router will be providing
addresses for the connecting devices in the 192.168.x subnet within the
Start and between the
Start+Limit address range (especially important for WiFi).
Save the settings with the
Save & Apply
button.
The further DHCP settings can be achieved at the Network menu, at the DHCP and DNS item,
General Settings
tab.
Further settings can be found in the detailed the User Manual document:
http://www.m2mserver.com/en/products/m2m-router-pro
Important!
The DHCP service is disabled by the factory default configuration. First, you have to enable the
DHCP service for the usage and performing the further DHCP settings!
