m2m Germany GmbH | Am Kappengraben 18-20 | 61273 Wehrheim | 06081 5873860
6 Configuration file
WIth LoRa Tool App is possible to configure the device using an XML file, instead to manually adjust the parameters (for details about the file format please ask to
enginko). This is very useful especially in case of multiple devices configuration.
With
“Save”
button an XML file with the actual configuration of the sensor will be generated. This is useful to store or clone the configuration, or to send it to
enginko's support if needed.
6.1 Multi devices configuration
WIth LoRa Tool App is possible to configure many devices in an easy way.
For multi-configuration is needed at least one XML file with the parameters to set.
Settings on this file will be applied to all the sensors.
With an additional XLS file is possible to load different LoRa configuration parameters (Activation Type, AppKey, AppEUI, NetKey, DevAddress, Band, Private
option) for each sensor, based on DevEUI.
When the sensor is approached, if one parameter is different from files, the APP will ask you if you want to overwrite.
XLS is prevailing on the XML, so if both files are enabled, if the DevEUI of the device matches one of the DevEUIs in the XLS file, LoRa parameters will be setted
from this one.
These configuration can be done in the in the Settings:
Enable or disable the use of the general configuration by file;
Enable or disable the use of the specific configuration by file;
Verify the passwords;
Writing the passwords.
For details on files format please ask to enginko.
7 LoRaWEB Tool
enginko provides, upon free registration,
LoRaWEB
online tool, where for each sensor it is possible to find documentation, javascript examples for parsing,
downlink generator and uplink decoder:
(iot.mcf88.cloud/LoRaWeb)
