Industrial BOX-HMI Hardware Manual
M2I Corporation
11-35, Simin-daero 327beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do 14055, Korea, Tel: +82-70-465-3366, Fax: +82-31-465-3355, www.m2i.co.kr
11 / 16
Chapter 6 Installation
6.1 Location Select for Installation
(1) This product should have at least 100mm space from other devices and be free from any mechanical
hazards for safe use.
(2) The installation should be done in -10~50℃ and 10~80% environment.
(3) If this product is installed in sealed space, cooling fan must be installed.
(4) Do not make power cable and communication cable be neighboring. It can cause malfunction from noise.
(5) An install location should be separated from power line and I/O cables which has a lot of noise. Also make
the wiring length short as possible.
6.2 DIN RAIL Mounting and VESA bracket bonding
This product has DIN Rail (width 35mm) Hook for mounting.
6.2.1 DIN RAIL
