M2 Antenna Systems 40M3C, Руководство пользователя

Страница: 11 / 15

STEP 22:
Refer to the dimension sheet for element placement. With the boom elevated on sawhorses or equivalent, using a
long tape measure and a permanent marker lay the boom out by marking the centers of each element. Equalize the
amount of extra boom at both ends on the antenna.
STEP 23:
Install each element at the marks on the boom. Be sure the eye bolts in each end of the boom are in the up
position. Double check the positions of each element and lightly tighten.
STEP 24:
Standing at one end of the antenna, sight down the boom and reference each element to one another making sure
each element is parallel to one another, make small adjustments as needed and tighten.
STEP 25:
Assemble the BALUN and feed system of the antenna. Refer to the dimension sheet and DRIVEN ELEMENT
assembly drawings.
40M3C HAIR PIN AND BALUN
ASSEMBLY INSTRUCTIONS
2” HD U-BOLT
&CRADLE
(QTY 4)
3” HD U-BOLT
&CRADLE
(QTY 2)
BTM PLATE
(M2APT0070)
TURN BUCKLE PLATE
(M2APT0110)
2” U-BOLT
&CRADLE
(QTY 1)
TURN BUCKLE
3/8 H&E
(QTY 2)
BOOM TO MAST PLATE
HARDWARE
ARANGEMENT
TURN BUCKLE PLATE
ARANGEMENT