M NovAseptic GMP, Инструкция по установке и эксплуатации

Страница: 7 / 32

Drive Unit (GM#/4#-#)
The drive unit delivers the rotating torque to the mixing head and is mounted on the
outside of the vessel. The speed counter is an optional feature on standard GMP Mixer
drive units.
Drive units with speed counter: catalog no
GM#/4B#-#
Drive units without speed counter: catalog
no GM#/4A#-#
Key Number Description
16 Magnetic outer drive head
17 Tank plate connection flange
18 Gearbox unit
19 Motor
20 Serial number label
21 Speed Counter
Required Tools
The following tools are required for installation of the NovAseptic
®
GMP Mixer.
These tools are NOT included with the mixer, but are available. Catalog numbers and
specifications for the components can be found at www.emdmillipore.com.
Description Purpose
Multi tool (GT#/25) Installation tool for mixing head and male bearing for use in small vessels
Tightening tool (GT#/26) Installation tool for male bearing
Heatsink tank plate (G94-#) Attached to the tank plate during welding to prevent deformation
NovAseptic
®
gauge 1 (G91-#)
For verification of geometry after welding
NovAseptic ® gauge 2 (G92-#)
Additional Equipment
The following additional equipment is available. Catalog numbers and specifications for
the component shown here can be found at www.emdmillipore.com.
Description Purpose
Control cabinet
(G50-#, G51-#) Speed control device for mixer. Regulates ro-
tation speed and ramp time for the motor. This
equipment is required for all installations.
16
17
18
19
20
21
6
NovAseptic
®
GMP Mixer Installation and User Guide 7