1. Specifications
2.Functional Description(TIC)
7) LBA Control lamp: It will be on when Control Loop Disconnection alarm appears.
8) Mode set key: Press it more than 2sec., the system will be changed to parameter set.
9) Down key(remainning time display key):Press it, set value decreases; Press more than 2sec, set
value decreases consecutively. Press it for several sec. during timer ON, remaining time will be
flickered.
10) Up key(Time ON/OFF key): If you press it, the set value goes up one by one; if you pres it more
than 2sec, the set value goes up consecutively. If you press it during controlling, you can turn on/off
the timer.
11) Auto Tuning Key: After parameter set, press AT more than 2sec., AT lamp(5times) will be
flickered and calculating PID automatically.
1) Displays processing value(PV) : Displays processing value in controlling and each kind of
parameters in parameter set
2) Displays set value and parameter set(SV) : Displays set value in controlling and parameter value in
parameter set. Press key No.9, then displays the remaining time.
3) Lamp of output control(OUT)
4) Warning lamp of highest and lowest(ALM)
5) Auto-tuning lamp(AT) :Press key No.11, then it starts PID auto-tuning with flikering of the lamp
and the lamp turns off when it is finish.
6) Timer lamp: Press No.10 key of the Timer during controlling, then lamp will be flickered. After a
set time, the light will be on; at a time, tENd will be appeared on SV. To back to the initial stage,
press Up key more than 2 sec.
Electrical supply
AC220V 50/60㎐ or AC110V 50/60㎐
Weight (㎏)
2.1
2.8
3.5
Internal
Stainless steel
Dimensions
186 x 232 x 120mm 242 x 256 x 120mm 322 x 256 x 120mm
MODEL
Dry block heater
DMB-1
DMB-2
Controller
Digital PID auto-tuning
Timer
Material
Block
Anodizing Aluminum
DMB-3
Type
1
2
3
Temperature
Range
A5℃ ~ 200℃
Accuracy
±0.5℃
99hr 59min
Heater power
250W
350W
450W
PV
SV
AT
ALM
OUT
MD
AT
3
4
9
5
8
2
7
11
10
1
6
