F3 in that the engine will ultimately shut down, but in the case of Extended Shut Down
you will hear the crew talking back and forth about how the engine ran, time schedules, etc.
F19 – Train Marker
This function will enable or disable the engine showing whether it is pulling a train or not.
Please refer to page 12 for a visual description of how the train lights will behave by
toggling F19 on/off. Enabling F19 will indicate there is no train being pulled by the
locomotive and disabling F19 will indicate there is a train being pulled by the locomotive.
F20 – Wrong Direction Running Lights
This function will set the train's operating lighting to be one of two different ways.
Either the headlight and ditch lights on (default) or, Wrong Direction (red light above
headlight on, ditch lights on, and no headlight lit). Please refer to page 18 for a visual
description of how the train lights will behave by toggling F20 on/off.
NOTE
– F19 and F20 will not operate if you have F0 disabled.
F21 – One Shot Doppler
You can set your MTH PS3.0-equipped engine to simulate the actual Doppler Effect
sound a real engine makes as it passes you. To do this, press the F21 button once
(enable F21) and then listen as the engine makes that pitch shift that mimics the
Doppler Effect perfectly. Press the F21 button again (disable F21) to shut off the
Doppler Effect. With a little practice in timing and speed you can make this happen
right in front of you.
F22 – Coupler Slack
When an engine hooks up and pulls a train it has to take up the coupler slack. You can
play this sound by pressing F22 twice (toggling on then off). This feature works two
ways – While the engine is sitting still, press F22 twice to enable it. Then, when you
move the engine, it will play the Coupler Slack sound.
The second way is to simply force the sound while the engine is moving. To do this,
simply press F22 twice (toggling it on then off). The sound will play.
F23 – Coupler Close
To play the Coupler Close sound press the F23 button twice (toggling it on then off).
You can play this sound as you're coupling cars together to add realism.
F24 – Single Whistle/Horn Blast
To play a Single Horn Blast press the F24 button twice (toggling in on then off). This
plays a single, short horn blast.
F26 – Brake Sounds
Pressing the F26 button (enable F26) will disable the Brake Sounds for your engine. The
Brake Sounds occur when you reduce the speed of your engine rapidly. To enable the
Brake Sounds press the F26 button (disable F26). Brake Sounds are On by default.
F27 – Cab Chatter
Cab Chatter occurs when the engine is sitting at idle. There are various times when the
crew will talk to each other when the engine is sitting at idle. Pressing the F27 button
(enable F27) will disable the Cab Chatter. Pressing the F27 button again (disable F27)
will enable Cab Chatter. Cab Chatter is On by default.
F28 – Feature Reset
Resets Features to defaults.
Premier Swiss Crocodile Electric Engine
23
