M-system R30NCIE1, Инструкция по эксплуатации

Страница: 2 / 13

R30NCIE1
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
EM-9020 Rev.3 P. 2 / 13
COMPONENT IDENTIFICATION
CN1
CN2
×10
×1
STATION No.
CONFIG
L ER
LINK
L ER
LINK
RUN
RD
SD
D LINK
ERR
NCIE1
■
FRONT VIEW
■
BOTTOM VIEW
■
SIDE VIEW
Status Indicator LEDs
PC Configurator Connector
CC-Link IE Field Communication
RJ-45 Modular Jack
Station No. Rotary SW
Lock Tab
Base Fixing Screw
Positioning Guide
Specifications
■
STATUS INDICATOR LED
ITEM ID COLOR FUNCTION STATUS DESCRIPTION
Status
Indicator
RUN Green Device State
ON Normal
OFF Indication of abnormality node
RD Green Receiving Data
ON Receiving
OFF Unreceived data
SD Green Sending Data
ON Sending
OFF Unsent
D LINK Green Cyclic Transmitting
ON In action
OFF Not complied with
ERR Red Error
ON Abnormality node
OFF Normal
CN1
LINK Green CN1 Linking Up
ON Linking up
OFF Link-down
L ER Red CN1 Receiving Data
ON Abnormality receiving data
OFF Normality receiving data
CN2
LINK Green CN2 Linking Up
ON Linking up
OFF Link-down
L ER Red CN2 Receiving Data
ON Abnormality receiving data
OFF Normal
■
STATION NO. SETTING ROTARY SW
The upper rotary SW sets the upper digits (MSB), and the lower rotary SW sets the lowest digit (LSB) (configurable range is
1 to 120).
Confirm available station numbers in the manual of the master unit (Factory setting: 01H).
3
For setting MSB of Station No. (×10)
For setting LSB of Station No. (×1)
8
67 34 5
2
1
0
F E D C B A
9
5
4
2
1
0
9
8
7
6
Example of Station No. setting
Characters on Rotary SW for MSB represent; A: 10, B: 11, C: 12.
For example, to set station No. 115, set the SW for MSB to B and SW for LSB to 5.
Do NOT set to D, E, F as they are not in use.