![background image](http://html2.mh-extra.com/html/m-system/r30ncie1/r30ncie1_instruction-manual_3119347010.webp)
R30NCIE1
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-9020 Rev.3 P. 10 / 13
■
CONSTRUCTION OF SYSTEM
The below figure shows an exemplary configuration of line connection.
USB cable
PC
GX Works2
Local
Station
Remote Device Station
(R30NCIE1)
Intelligent
Device Station
CC-Link IE Field
Master
Station
1) Master station, Local Station, Remote Device Station (R30GCIE1) and Intelligent device station are connected by Ethernet
cable. CN1 and CN2 of CC-Link IE Field Network RJ-45 modular jacks can be connected in any order.
Before wiring, make sure to turn off the power of each unit.
2) After wiring is completed, turn on each unit.
■
CREATION OF PROJECT
Connect the PC and the master station, and create a project of the master station with GX Works2 installed in the PC.
1) Start GX Works2.
2) From the main menu, select [Project]
➞
[New] to create a new project.
1. Select
3) From the menu tree of Project, select [Parameter]
➞
[Network Parameter], and double click [Ethernet/CC IE/MELSEC-
NET] to open the [Network Parameter Ethernet/CC IE/MELSECNET] window.
1. Double click