background image

M5XPHS

5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201  Fax: +81(6)6659-8510  E-mail: [email protected]

EM-2776  P. 3 / 4

EXTERNAL VIEWS

 

LEFT VIEW

 

FRONT VIEW

Output Setting

DIP SW

Input Setting

DIP SW

1

2

3

4

5

6

SW1

On

Power Indicator LED

Configurator Jack

1 2 3 4

SW2

On

 

RIGHT VIEW

HOLD MODES

 

PEAK HOLD MODE

The transmitter output responds only to an increasing signal, holding the maximum value until a higher signal or a command 
to reset is received.

 

VALLEY HOLD MODE

The transmitter output responds only to a decreasing signal, holding the minimum value until a lower signal or a command 
to reset is received.

 

PEAK-TO-PEAK HOLD MODE

The transmitter output responds only when the input signal goes over the previously monitored maximum value or goes 
below the previously monitored minimum value.
The output is proportional to the peak-to-peak value, absolute difference between the maximum and the minimum values.

t

HOLD

0%

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

t

0%

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

INPUT

OUTPUT

RESET

• Peak-to-Peak Hold Mode

Содержание M5XPHS

Страница 1: ... may have to review the CE requirements in regard to the whole system and employ additional protective measures to ensure the CE conform ity POWER INPUT RATING OPERATIONAL RANGE Locate the power input rating marked on the product and confirm its operational range as indicated below 24V DC rating 24V 10 1W GENERAL PRECAUTIONS Before you remove the unit or mount it turn off the power supply and inpu...

Страница 2: ... Pull down the DIN rail adaptor using a minus screwdriv er B Pull out the lower part of the unit C Remove the upper part from the DIN rail A Slider C B TERMINAL CONNECTIONS Connect the unit as in the diagram below or refer to the connection diagram on the side of the unit EXTERNAL DIMENSIONS unit mm inch 94 3 70 3 12 25 98 41 1 61 3 3 13 When mounting no extra space is needed between units DIN RAI...

Страница 3: ... a higher signal or a command to reset is received VALLEY HOLD MODE The transmitter output responds only to a decreasing signal holding the minimum value until a lower signal or a command to reset is received PEAK TO PEAK HOLD MODE The transmitter output responds only when the input signal goes over the previously monitored maximum value or goes below the previously monitored minimum value The out...

Страница 4: ... 0 100 of the full scale When the output does not track the input signal check that the terminals 3 4 shortcircuited or open is match to the setting 5 Output Check that the load resistance meets the de scribed specifications POWER INDICATOR LED The transmitter is provided with a power indicator LED which blinks in different patterns indicating various oper ating status The following figure indicat...

Отзывы: