R3-NL2
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-8428 Rev.9 P. 11 / 13
■
NodeObject FUNCTIONAL BLOCKS
NETWORK
VARIABLE
TYPE
{Range}
{Default}
EXPLANATIONS
nviRequest
SNVT_obj_request
{Usable RQ
RQ_NORMAL
RQ_REPORT_MASK
RQ_UPDATE_STATUS}
Used for integration tools such as LonMaker.
nvoStatus
Used for integration tools such as LonMaker.
• nviRequest RQ_NORMAL
0 is set at nvoStatus.
• nviRequest RQ_REPORT_MASK
report_mask bit is set at nvoStatus.
• nviRequest RQ_UPDATE_STATUS
0 is set at nvoStatus.
• 1 is set at invalid_id when any value other than the above three
types is set at nviRequest.
nvoFileDirectory
SNVT_address
Used for integration tools such as LonMaker.
nvoCommErr
SNVT_count
{0 through 65535}
{0}
Counted in internal communication errors.
Reset to 0 after the count has reached 65535.
nvoCardStatus
SNVT_state
{0 or 1}
{0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0}
Indicates that I/O modules are mounted in each slot.
Bit 0 through bit 15 are applied for slot 1 through 16.
0: Not mounted
1: Mounted
nvoCardErr
SNVT_state
{0 or 1}
{0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0}
Indicates error status for each module/slot.
Bit 0 through bit 15 are applied for slot 1 through 16.
0: Normal
1: Error
CONFIGURATION
PROPERTY
TYPE
{Range}
{Default}
EXPLANATIONS
cpMaxSendTime
SCPTmaxSendTime
{0.0 through 6553.4}
{5.0}
Sending time intervals of input network variables. (Power restarting
required)
Network variables are sent out in this time intervals even when
there is no change in input signals.
Default setting 0.0 with the R3NL2_LVI32O24_104.XIF (No sending
out unless a change is detected.)
cpMinSendTime
SCPTminSendTime
{0.0 through 6553.4}
{0.1}
Minimum sending time intervals of input network variables. (Power
restarting required)
This minimum time intervals is maintained even when the input
signals changes faster than it.
Default setting 1.0 with the R3NL2_LVI32O24_104.XIF
