18
EK 4
English
C - HOW TO CONNECT TO THE ELECTRICAL MAIN:
Check to see that the main voltage complies with the one required by the hood, which
is indicated on the tag that is applied on the internal side of the appliance.
Assemble a suitable plug on the wire or insert a proper power two-pole switch if it is
to be directly connected to the main with a 3m/m minimum opening between con-
tacts between the main and the appliance. All the above-mentioned electrical parts
must comply with the current standards.
The yellow/green earthing cable (if included) must not be interrupted.
D - OPERATING CHECKS:
Check lights and motor start-up on all three speeds.
Reassemble the lower filter holding frame by means of the two brass screws. (fig. 4)
Fig.4
