background image

R7F4DD-DAC16C-H

5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201  Fax: +81(6)6659-8510  E-mail: [email protected]

EM-8007-F  P. 4 / 8

MOUNTING INSTRUCTIONS

 

DIN RAIL MOUNTING (PARALLEL)

• Mounting

1) Set the upper hook at the rear side of the unit on the DIN 

rail.

2) Push the lower part in.

A

B

• Dismounting

1) Push down the DIN rail mounter slider with the tip of a 

flat-blade screwdriver.

2) Pull the lower part of the unit.
3) Remove the upper hook of the unit from the DIN rail.

A

C

B

 

SURFACE MOUNTING

1) Insert the two DIN rail mounter sliders until it clicks 

once, as shown below.

A

A

2) Mount the unit with M4 screws referring to the External 

Dimensions. (Torque: 1.4 N·m)

 

DIN RAIL MOUNTING (RIGHT ANGLE)

• Mounting

1) Insert the longer DIN rail mounter slider until it clicks 

twice, as shown below.

A

2) Set the upper hook at the rear side of the unit on the DIN 

rail.

3) Push the lower part in.

B

C

• Dismounting

1) Push down the DIN rail mounter slider with the tip of a 

flat-blade screwdriver.

2) Pull the lower part of the unit.
3) Remove the upper hook of the unit from the DIN rail.

C

A

B

Содержание Devicenet R7F4DD-DAC16C-H









Отзывы: