20
73VR2102 / 73VR2104 / 73VR2106 / 73VR2108 / 73VR2110 / 73VR2112 USERS MANUAL EM-7395-B Rev.24
REMOVING THE CF CARD (STOPPING, WHEN SAME CF CARD IS SWAPPED)
1. When the CF card, which was inserted into 73VR21xx, is going to inserted, follow the instruction below.
2. If the power is supplied to the 73VR21xx, confirm with the LED behind the cover that the CF Card is not accessed.
3. Push EJECT button to extract the CF Card
4. Special operation is not required when CF card is inserted. In this case, the data in the inserted CF card is not
deleted. (The inserted CF card must not be deleted or edited the file in the card with PC etc.)
2.6 SD CARD
The operation confirmed SD/CF conversion adapter and SD card described below are available for storing on SD
card. The SD/CF conversion adapter, which has SD card incorporated, can be handled as CF card. SD card can be
purchased from M-System (except SD/CF conversion adapter). Consult M-System.
SD/CF conversion adapter: DeLOCK adaptor CF II to SDHC,SDXC,
61796 (operation has been confirmed with the adaptor purchased in the year of
2016.)
62637 (operation has been confirmed with the adaptor purchased in the year of
2018.)
SD card: Hagiwara Solutions NSDA-004GT (discontinued), NSDA-004GL (discontinued),
NSD6-004GH (B21SEI
Note: The use of recommended device prevents loose of data, however correct operating it is not always guaranteed.
WARNING ! – SD card limitations
•
SD card memory is 4 GB, however, only 1 GB will be used.
•
Storing interval 100 msec. setting is not available. Use the SD card in a storing interval slower than 0.5 sec.
• Do NOT hot swap the CF card every minute on the minute (at 00 second). The data of one cycle may be lost.
• FTP data transfer setting is not available. If FTP data transfer operation starts during storing data on SD card, data
on SD card may be lost.
• When formatting SD card, use a dedicated software “SD Card Formatter”.
“SD Card Formatter” is downloadable at SD Association’s web site.
https://www.sdcard.org