M-system 47LPA, Руководство по эксплуатации

Страница: 13 / 15

47LPA
P. / 5 EM-955-B Rev.2
■
ADVANCED SETTING MODE
Shift
Shift
Alarm/
Scaling Factor
Measuring Mode
Brightness
Automatic Return Time
to Measuring Mode
Transition Time to
Lockout Setting Mode
C1 / C2 / C3 / C4 / C5
00...99
00...99
00.0...99.9
Hold down Alarm/ + Scale/ button
at once for ≥ 3 seconds
Hold down Alarm/ or Scale/ button
for ≥ 1 second
Shift
Shift
Alarm/
Alarm/
Alarm/
Alarm/
Alarm/
Alarm/
Alarm/
Shift
Alarm/
Alarm/
Advanced Setting Mode
Version Indication
Display Refreshing Rate
001...999
Alarm/
A
A
Set value
Setting Parameters
Shift
Scale/
Alarm/
Low End Cutout
Low End Cutout Value
OFF / ON
000...999
Shift
Alarm/
Scale/
Alarm/
Alarm/
Scale/
Scale/
Scale/
Scale/
Scale/
Scale/
Scale/
Scale/
Scale/
Scale/
Scale/
Scale/
Scale/
...
...
...
...
PARAMETER
Scaling factor
Low-end cutout
Low-end cutout value
Brightness
Automatic return time to Measuring Mode
Low-end cutout: Input signal below the preset cutout value is forcibly cut to 0.
Set for the three lowest digits of the scaled range (disregarding the decimal point)
With the cutout set to OFF, the low-end cutout value setting is locked.
Automatic return time to Measuring Mode: The display goes back automatically to Measuring Mode if the front buttons are left untouched
for the specified time period while it is in one of the setting modes (except the loop test output mode).
With this value set to 0, the display must always be exited manually from the setting mode.
Transition time to Lockout Setting Mode: The display goes to Lockout Setting Mode only when the designated buttons are pressed for the
specified time duration.
*
1. F00.0 = 25 msec. refreshing rate
Specify in seconds
Brightness level 1 (dark)
Low-end cutout value setting
Low-end cutout ON
Low-end cutout OFF
Brightness level 4
Brightness level 5 (bright)
Brightness level 3
Brightness level 2
Frequency/counting scaled to 1/n
INDICATORS FUNCTION
DEFAULT
VALUE
DISPLAY
Fnc
Fnc
Zro Fnc
D/P Fnc
D/P Fnc
D/P Fnc
Transition time to Lockout Setting Mode Specify in seconds
Fnc
Version indication Version number, indication only N/A N/A
N/A
...
Fnc
Display refreshing rate
* 1
Specify in seconds