![background image](http://html1.mh-extra.com/html/m-system/47llc/47llc_operating-manual_3126851062.webp)
62
47LLC OPERATING MANUAL EM-9505-B Rev.4
7
■
TO GO ON TO SET THE LOAD RATIO,
Skip to Step 3 in “6.3 STEP 3. LOAD RATIO”.
■
TO qUIT,
Hold down Alarm/
↓
or Scale/
↑
button for 1 second or more to return to Measuring Mode.
NOTE
■
IF THE FRONT BUTTONs ARE LEFT UNTOUCHED…
•
The indication turns on with applying the last changes after the specified time period (default: 15 sec.) while it is in the
setting standby mode (indication blinking in Step 4 and 5).
•
The display goes back automatically to Measuring Mode after the specified time period (default: 15 sec.) in one of the
other modes.
•
This time period (automatic return time) is configurable. (Refer to 15. GOING BACK AUTOMATICALLY TO MEASUR-
ING MODE.)
■
TO ABORT A sETTING…
•
Hold down Max/Min button for 1 second or more in the setting standby mode (indication blinking in Step 4 and 5) to
return to Measuring Mode without applying the last changes.
•
If you get lost in a setting mode, you can execute initialization. (Refer to 21.2 INITIALIZING SETTING VALUES.)
■
sHIFTING DIGITs
•
Each time pressing Shift button, the blinking digit moves to the right.
■
sETTING A NUMERICAL VALUE
•
Each time pressing Up button, the numeral is incremented by 1.
・・・・・
*
Fifth digit