![background image](http://html1.mh-extra.com/html/m-system/47llc/47llc_operating-manual_3126851047.webp)
47
47LLC OPERATING MANUAL EM-9505-B Rev.4
4
Press Shift button to shift the display into the setting standby
mode.
•
The fifth digit starts blinking, to which you can apply changes.
•
‘Tch’ indicator turns off.
5
Press Shift and Up buttons to set to ‘10.00’.
•
Press Shift button to go to the next digit and Up button to change
the blinking value.
NOTE
•
‘10.00’ is a display example. Set any value within the setting range.
•
‘Min’ and ‘Max’ indicators start blinking when the set value is within invalid range. Return the setting within the valid
range.
6
Press Alarm/
↓
or Scale/
↑
button to apply the new setting.
•
And the next parameter setting is indicated.
NOTE
•
Press Alarm/
↓
button, and the display scaling value B will be indicated within the range of -19999 to 19999 depending
on the setting.
•
Press Scale/
↑
button, and the load ratio will be indicated within the range of 10.0 to 100.0 depending on the setting.
7
■
TO GO ON TO SET THE DISPLAy SCALING VALUE B,
Skip to Step 3 in “5.4 STEP 4. DISPLAY SCALING VALUE B”.
■
TO qUIT,
Hold down Alarm/
↓
or Scale/
↑
button for 1 second or more to return to Measuring Mode.
Blinking
Blinking