![background image](http://html2.mh-extra.com/html/m-system/47lct/47lct_operating-manual_3124801007.webp)
47LCT
P. 7 / 16
EM-9507-B Rev.6
■
SCALING SETTING MODE
Shift
Shift
Scale/
Alarm/
Input Type
Measuring Mode
Input Scaling Value A
Display Scaling Value A
Input Scaling Value B
Display Scaling Value B
Decimal Point Position
*
1
-19999...19999
A0-1 / A0-5
*
1
Teach Calibration (Zero)
Set value
Setting Parameters
Set value
Teach Calibration (Span)
*
2
*
2
-19999...19999
0000...1.0000
Hold down Scale/ button
for ≥3 seconds
Hold down Alarm/ or Scale/ button
for ≥1 second
Shift
Shift
Up
Up
Up (set)
Up (set)
Alarm/
Scale/
Alarm/
Alarm/
Scale/
Alarm/
Alarm/
Scale/
Alarm/
Scale/
Alarm/
Shift
Shift
Alarm/
Scale/
Alarm/
Scaling Setting Mode
Alarm/
Alarm/
Alarm/
Alarm/
Scale/
Scale/
Scale/
Scale/
A
A
Scale/
Scale/
Scale/
Scale/
Scale/
Scale/
Scale/
Scale/
Scale/
Scale/
*
1. Depends upon model suffix code. Refer to the following parameter list.
*
2. Refer to Teach Calibration for detailed procedures.
Analog Output 100% Adj.
UP / DOWN
Shift
Alarm/
Alarm/
Analog Output 0% Adj.
UP / DOWN
Alarm/
Shift
Alarm/
Alarm/
Alarm/
Analog Output Action
at Force Zero Display
DISP / SCALE
Shift
■
OPERATIONS IN SETTING MODES
• Main display
The main display shows the current settings while the panel meter is in the setting mode.
• Shifting through setting parameters
In any setting mode, pressing Alarm/ button shifts one parameter to the next. Pressing Scale/
button shifts one to the
previous.
• Changing parameters
Pressing Shift button while one of the parameter settings is indicated on the display shifts the panel meter into the setting
standby mode. The digit to which you can apply changes starts blinking.
Press Up button to change the blinking value.
Press Shift button to go to the next digit.
Press Alarm/ or Scale/
button to apply the new value and go to the next or previous parameter setting.
• If you get lost...
Hold down Max/Min button for 1 second or more to return to the measuring mode without applying the last changes. (Those
which have been already applied by pressing Alarm/ or Scale/
button are not cancelled.)