![background image](http://html1.mh-extra.com/html/m-system/47d-series/47d-series_reference-manual_3120042010.webp)
10
47D Series Modbus Reference Guide EM-9501-C Rev.4
3.2 I/O DATA
ADDR. WORD CONTENTS
1
1
Device Error code
15
Bit
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
I.Err
W
.Err
R.Err
A.Err
P.Err
Shows the following error status when the relevant bit turns ‘1.’
I.Err : E
2
PROM read error at the device startup
W.Err : E
2
PROM write error
R.Err : E
2
PROM read error
A.Err : ADC error
P.Err : Excitation supply output error
2
1
Device Status code
15
Bit
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
LL
L
P
H
HH
S.
ov
er
S
.under
Bur
nout
Loop
Test
Analog
Shows the following device status when the relevant bit turns ‘1.’
LL, L, P, H, HH : Alarm tripped
S.over : Over-scale
S.under : Under-scale
Burnout : Burnout
Loop Test : Loop Test mode
Analog : Analog output provided
3
2
Measured value *
1,
*
2
5
2
Measured value, MAX *
1,
*
2
7
2
Measured value, MIN *
1,
*
2
9
2 Reserved
11
2 Reserved
13
2 Reserved
15
2 Reserved
17
2 Reserved
19
2 Reserved
21
2
Reserved
23
2
Analog output value *
2,
*
3
25
2
Reserved
27
2
Reserved
29
2
Reserved
31
2
Reserved
33
2
Reserved
35
2
Reserved
37
2
Reserved
39
2
Reserved
41
2
Reserved
*1.
V M AC
Only normally measured signals are applied to Max and Min values. Values during scaling errors are not. Values
other than in normal measuring conditions are indefinite.
*2. Display value, Max value, Min value and Analog output are indefinite during the infrared communication mode.
*3. Analog output is valid only when the device status code for the analog output equals ‘1.’ It is indefinite when the code equals
‘0.’