Pag. 26/49
Doc. ISM0076_MANUALE_CN SEAL-MV_ENG_REV04.DOCX
Warning Description signs applied
Symbol/indication
Quantity
Notes
4.
Label “check correct pump-
motor alignment prior to start“
1
/
2.
Label rotation and not run dry
indication
1
2
3.
Hydro-test label
1
3
4.
Label quality control assembly
1
Internal use
18.
INSTRUCTIONS AND PROCEDURES FOR THE TRAINING OF THE PERSONEL AND FOR
EMERGENCIES
Operators responsible for the various life stages of the pump must be:
- For assemblers: staff formed and trained on good practices for handling of goods with the use of tools
and lifting equipment;
- For installers of pipes and electrical connections: qualified and trained staff to operate on electrical
plants, staff with experience in hydraulic installations;
- For users: professional staff trained in the instruction for use of this pump.
In case of emergency:
- Alert who is close to the situation of danger, even waving his arms;
- Stop the pump by pressing the nearest emergency stop button;
18.1.
Recovery mode
To return to normal operating conditions, you must delete all the causes that have generated the
emergency, possibly repairing or replacing the components that caused the failure.
CAUTION
After the intervention of security devices, you must find the cause of action before
continuing operations.
18.2.
Fire-fighting equipment to be used:
In case of fire involving the pump, you can use water or foam liquid only after removing the voltage, or
a powder type fire extinguisher with extinguishing agent. Do not use CO2 as being launched at -79 ° C
may react violently with hot parts.
