M-neb Dose+, Инструкция по эксплуатации

Страница: 22 / 40

- 22 -
6.6 Use of the continuous mode
To operate the M-neb
®
dose
+
mesh nebulizer MN-300/8 in continuous mode, this must be
selected after M-neb
®
dose
+
mesh nebulizer MN-300/8 has been placed in operational
readiness. To do this, proceed as follows:
6.6.1 Press (> 1 second) the on/off button of the M-neb
®
dose
+
mesh nebulizer MN-300/8
(control unit). The M-neb
®
dose
+
mesh nebulizer MN-300/8 switches on
automatically. As indication, you will hear a short acoustic signal tone and the
battery status indicator continuously lights up green.
6.6.2 The operational readiness of the M M-neb
®
dose
+
mesh nebulizer MN-300/8 (control
unit) is established after the operating mode status indicator has flashed three times
blue briefly.
6.6.3 Now you can change the operating mode from the triggered mode to continuous
mode in a time window of 60 seconds, which is equivalent to the maximum standby
time.