M-E VDV-807, Руководство по эксплуатации

Страница: 22 / 48

GB GB
GB
ENGLISH | VDV-807
VDV-807 | ENGLISH
22
Monitor resolution: 1024x600
Dimensions: 220 x 160 x 28 mm (wxhxd)
Frequency: 433 MHz; <10mW
NOTES
The functionality of the unit can be affected by the influence
of strong static, electrical or high frequency fields (dischar-
ging, mobile phones, radios, microwaves).
Cleaning and maintenance
Always disconnect mains powered units from the mains supp-
ly before cleaning (disconnect the plug). The unit housing can
be cleaned using a soapy soft cloth. Do not use any abrasive
materials or chemicals. Remove dust build-up from ventilation
slits using a brush and clean up using a vacuum cleaner. Do
not hold the vacuum cleaner nozzle directly against the unit.
SAFETY NOTES
The warranty will be null and void in case of damages arising
from violations of these operating instructions. We are not
liable for consequential damages!
We accept no liability for material damages or injuries arising
from inappropriate use or violation of the safety instructions.
In such cases all warranty claims are null and void!
For reasons of safety and licensing (CE), unauthorised conver-
sion and /or modification of the product is prohibited.
Own melody on memory card (max. 32 GB)
This intercom allows you to select your own ringtones, which
you can save in MP3 or WAV format on a micro SD card. The
memory card must be formatted with FAT32. You save your
ringtones directly on the SD card (without using folders), a
maximum of 16 different ringtones can be saved on the SD
card. Insert the SD card prepared in this way into the SD card
slot (15) of the indoor station. The ringtones on the memory
card replace the internal ringtones. If the memory card is
removed again, the internal melodies are available again.
Radio module
Use this setting to change the ringing melody of a connected
radio doorbell receiver from the BELL or FG series.
Changing the coding of the internal radio module
In the event of an overlap with other radio doorbells in the
neighbourhood, the transmitted code can be changed. To do
this, press and hold the Alarm/Intercom button (10) for 5
seconds; a successful code change is indicated by an acoustic
signal. After this procedure, the radio doorbell must be reset
and relearned (see instructions for the radio doorbell).
TECHNICAL DATA
Operating voltage: 15 V DC
Power consumption: 270 ± 50 mA
Temperature range: 0 to +50°C
Maximum air humidity: 85%
Screen size:
178mm (7’’)
VDV-807_I-Manual_170x170 Fin1.indd 22 11.12.20 21:17