M-E ODYON pro WE10/230, Инструкция по эксплуатации

Страница: 20 / 32

Model: ODYON pro WE10/230
Thank you for purchasing this wall-mounted receiver from the ODYON pro series.
This wall receiver has been designed for excellent functionality and offers perfect
performance and solution possibilities. The essential design guarantees max-
imum ergonomic comfort and clear functional operability.
The 1-channel ODYON pro wall receiver offers a potential-free switch-over con-
tact and can control up to 2 functions of one or more other ODYON pro receivers.
Ranges of several hundred metres are achieved, depending on the environment
and the constellation of the radio system. An external antenna can also be used
to increase the range.
The switchover contact offers 3 different operating modes. It can either be
switched every time a button is pressed on the remote control or switched ON
with a time delay and OFF with a time delay. In addition, it is also possible to
teach in two buttons of a remote control in order to be able to switch ON and
OFF selectively.
This wall receiver can also be used as a repeater for other units of the ODYON pro
series to further increase the range.
The ODYON pro WE10/230 wall receiver is operated with 230 V mains voltage
and may only be installed by a qualified electrician .
A maximum of 16 channels can be taught-in to a wall receiver. Each function key
of a hand-held transmitter corresponds to one channel.
SCOPE OF DELIVERY
ODYON pro WE10/230
1x 1-channel wall receiver
2x Cable gland
1x Blind plug
1x manual
AVAILABLE ACCESSORIES
Rod antenna with magnetic base
Screw antenna
ODYON hand-held transmitters (1, 2, 4-channel)
EN
20